Mark Levinson N40 User Manual download pdf (Page 75)

5-9

Nº40 Media Console Menu System

To summarize, in this setting:

• The subwoofer channel becomes the right sub channel

• The aux 1 channel remains unused

• The aux 2 channel becomes the left sub channel.

One surround back speaker

If your system requires only a surround back (Sb) in addition to the

standard 5.1 channels (front left, front center and front right, plus

surround left and surround right, plus a subwoofer), select “one

surround back” from the menu.

In this case, the aux 1 output becomes the surround back (Sb)

output to be used with the amplifier that drives the surround back

speaker, as shown:

Figure 5-2: Setup for 6.1 surround sound.

The indicated angles are measured from front-and-center, and are

approximate guidelines only. (Try to stay within about 10° of the

angles indicated, and try to maintain as much symmetry as possible.)

For clarity, we have omitted indicating where the subwoofer is

located in these drawings, since no one subwoofer location is

always going to be optimal in all rooms.

To summarize, in this setting:

• The aux 1 channel becomes the surround back channel

• The aux 2 channel remains unused.

Two surround back speakers

If you have two separate pairs of surround speakers in the main

zone of the system, select “two surround backs” from the menu.

To summarize, in this setting:

±30°

±90°±90°

±30°

180°

LCR

SrSl

Sbc

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 155 156

No comments

Mark Levinson N40 User Manual Page 75