Mark Levinson No535H User Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
21
Nº500H Series Power Amplifier
1.VerifythatthemasterdeviceandtheNº500Hseriesamplierare
properly connected together with a router.
2.VerifythattheNº500Hseriesamplier’snetworksetupiscorrect.
Access to the internal Web page via a computer is required to
verify the network settings of the Nº500H series.
• Verifythatthenetworkcablesareproperlyconnectedbetween
the router, switch, or hub and the amplifier. If connecting to
a computer, verify that the computer network cable is in the
correct port.
• Verifytheageoftherouter,switch,orhub.Theremaybe
a communication issue with the Nº500H series and older
network devices. Power cycle the Nº500H series and use a
newer router, switch, or hub between the network and the
amplifier.
• Ifconnecteddirectlytothecomputer,makesureacrossover
cable is used.
• VerifythattherouterandcomputerhavevalidIPaddresses.
• Verifythattheproxyserverinthecomputer’snetworksetupis
disabled.Anactiveproxyservercaninterferewiththesoftware
upgrade procedure.
• Ifthewebbrowsercannotndthehostnameoftheamplier,
verify the following:
•EnsurethatthelocalDNSserverisproperlycongured.
We recommend configuring the local DNS Server to “DNS
Forwarding”mode.ToconguretheDNSServer,referto
the setup manual of the server.
•Ifusingasubdomain,enterthecompleteaddressintothe
browser.Forexample,http://NO500H.yourhome.network.com
•EntertheIPAddressoftheamplierintothebrowser.For
example,“http://192.168.50.5
1. Power-cycle the Nº500H series, waiting at least 10 seconds
between powering the amplifier off and on.
2. Restore the default settings on the internal web page.
3. Visitwww.marklevinson.comandsearchtheknowledgebasefor
more information.
4. Contact your Mark Levinson dealer.
.
No Response to
Commands in ML Net
No Connectivity Via
Ethernet
If All Else Fails...
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments