Mark Levinson 512 Owner's Manual download pdf (Page 20)

Mark Levinson

Rear Panel Overview

The numbers in the Nº512 rear panel illustration correspond with

the summary list of items below.

1. Analog outputs

2. Digital outputs

3. IR input

4. RS-232 control port

5. Ethernet port

6. Trigger input and output

7. AC input

1. Analog Outputs

Provide two balanced XLR and two single-ended (unbalanced) RCA

connectors for the stereo analog audio output.

The pin assignments, shown on the left, of the XLR-type female

input connector are consistent with the standards adopted by the

Audio Engineering Society. Refer to the operating manual of your

preamplifier to ensure that the pin assignments of its balanced

output connectors correspond to the Mark Levinson Nº512 CD/

SACD player. If not, wire the cables so that the appropriate input

pin connects to the equivalent output pin.

2. Digital Outputs

Provide an AES/EBU or an S/PDIF connector for the digital audio

output.

3. IR Input

Accepts the input of IR (infrared) signals from other equipment. The

3.5mm jack accepts a stereo or mono plug.

3 4

5 6

Pin Assignments:

Pin 1: Signal Ground

Pin 2: Signal + (non-inverting)

Pin 3: Signal – (inverting)

Connector shell is chassis ground

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 49 50

No comments

Mark Levinson 512 Owner's Manual Page 20