Mark Levinson 512 Owner's Manual download pdf (Page 33)

Nº512 CD/SACD™ Player

Connecting the Cables

The Nº512 can be connected to the computer in two ways – through

a router or directly to the computer. Before connecting the cables,

ensure that both the computer and the Nº512 are powered down.

To Connect Using a Router:

1. Connect a network cable from the router to the Ethernet port

on the rear panel of the Nº512.

2. Connect a second network cable from the router to the Ethernet

port of the computer.

To Connect Without a Router:

Use a network crossover cable to connect the Nº512 directly to

the computer. Different from a standard network cable, the

crossover cable is designed to connect network access ports directly

together without a hub, router, or switch.

Connect the crossover cable from the Ethernet port on the rear

panel of the Nº512 to the Ethernet port of the computer.

Network Setup

Parameters

Accessible only through the Nº512 internal Web page, the network

setup parameters include:

• Static IP Address – provides a fixed IP address. This IP

address is NOT automatically selected; it must be entered. If

DHCP is on, then an IP address doesn’t need to be entered.

IP address 192.168.50.8 is the factory default value.

•Subnet Mask – identifies the subnet mask for the Nº512.

This IP address is automatically assigned by DHCP. If DHCP

is off, then the address must be entered manually and it

must agree with the subnet mask address of the router. IP

address 255.255.255.0 is the factory default value.

• Host Name – indicates the network name given to the

Nº512 player. The host name is made up of two parts that

are separated by an underscore. The first part contains one

Computer

512

Router

Crossover

Cable

Computer

512

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 49 50

No comments

Mark Levinson 512 Owner's Manual Page 33