Mark Levinson 512 Owner's Manual download pdf (Page 38)

Mark Levinson

Note 192.168.50.8 is the default static IP address for the Nº512. The router

must be on the same subnet as the player and computer, but also must

have its own unique address.

3. Press the Power button on the Nº512.

4. On the computer, open the Internet Explorer Web browser.

5. On the address line (URL), type the static IP address of the

Nº512 (192.168.50.8 is the default value) and press the Enter

button. There may be a short delay before the Nº512 Web page

loads.

6. The Home tab of the Nº512 internal Web page is now displayed.

The tab is in red text to indicate that it is the current page. The

top of the page provides the general status of the Nº512. The

bottom of the page contains the network parameters setup.

7. Observe that the Status section of the Web page identifies the

host name of the Nº512 player. The host name can be modified,

but only the first eight characters are affected; anything after

the underscore may not be modified.

To change the host name of the Nº512:

A. Type the new name into the white box to the right of the

parameter. The new name must be made from the capital

letters, A to Z, and the numbers, 0 to 9. Underscores may also

be used. Only eight characters are allowed.

B. Click the Submit button to save the new value.

C. Click the Refresh button in the Status section of the Web

page to observe the new host name.

8. Observe that the Status section of the Web page also identifies

the IP address of the Nº512 player. The static IP address can be

modified, if desired.

To change the IP address of the Nº512:

A. Type the new IP address into the white box to the right of the

parameter.

B. Click the Submit button to save the new value.

C. Enter the new IP address of the Nº512 into the browser. The

Nº512 Web page loads, reflecting the new information.

The network connection is now complete.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 49 50

No comments

Mark Levinson 512 Owner's Manual Page 38